Jump to the main navigation Jump to search Jump to breadcrumbs Jump to main content Jump to footer Jump to lang switch Jump to home page Jump to watch list

The ISOCELL ABC: Key terms relating to blow-in insulation and airtightness

4 minutes reading time

Cellulose insulation combines excellence in building physics with a practical approach to the circular economy. In our specialist glossary, we summarise the most important terms and key figures – presented in a well-researched and practical way to help with your next projects.

 

A

  • AIRSTOP and OMEGA: A comprehensive range of airtightness products (vapour barriers, adhesive tapes, collars). AIRSTOP for the internal airtight layer and OMEGA for external weather protection.
  • Air resistance: A measure of the insulation material’s air permeability. Cellulose exhibits high resistance, which reduces convection and rotational flows and has a positive effect on the sound-insulating properties of the insulation material.

 

B

  • Blow-in density: The specific quantity of material per cubic metre (kg/m³). The quantity of material required depends on the type of building element and the thickness of the insulation. For insulation blown into open spaces on floor slabs, the installation density is around 36 kg/m³; in roof and wall constructions, it is around 55 kg/m³.

     

C

  • Capillary conductivity: The ability of cellulose fibres to actively transport and temporarily store moisture, which can protect adjacent building components from mould growth and moisture damage.
  • Cellulose recycling: ISOCELL is produced from single-source daily newspaper. The material can be reused multiple times (extracted) and can even be carbonised into fertiliser at the end of its life cycle. 

 

E

  • Ecology & Primary Energy: Cellulose insulation has an excellent environmental footprint, as it is manufactured from single-grade newsprint using energy-efficient processes. ISOCELL requires only 1/12 of the primary energy used by polystyrene and 1/6 of that used by glass wool.
  • EPD (Environmental Product Declarations): An Environmental Product Declaration based on international standards that provides ecological transparency across the entire life cycle of a building material. ISOCELL cellulose achieves excellent scores for energy efficiency and its impact on climate change.

     

F

  • Felting and resilience: Thanks to the special manufacturing process using a vortex mill, the fibres remain long and elastic. During blowing, the fibres interlock (felting) and create a spring-like tension that presses the material against the building surfaces.
  • Fire protection (REI 90): As with timber, a protective layer of char forms on cellulose insulation in the event of a fire. Depending on the construction, this helps building elements achieve a fire resistance of up to 90 minutes.

 

G

  • GWP (Global Warming Potential): A measure of greenhouse gas potential. ISOCELL cellulose has a negative GWP (approx. -1.42 kg CO₂-eq./kg), as it stores more carbon than is emitted during its production. (Source: (A1–A3) EPD-ISC-20240568-CCA1-EN 02/05/2025)

 

O

  • Open-blow installation: An efficient technique for insulating the top floor ceiling, in which the material is applied exposed to the surface, seamlessly and without waste.

 

P

  • Phase shift: The time it takes for a temperature peak to travel from the outside to the inside of a building component. With cellulose, optimal values of 12–14 hours can be achieved.

 

S

  • Seamless insulation: Unlike roll-form insulation, the cellulose fibres interlock during the blowing process to form a precisely fitting, thermal-bridge-free insulation layer that fills even the narrowest gaps and complex geometries.
  • Settlement stability: Due to the matting of the fibres, once correctly installed, the insulation retains its shape for decades despite mechanical vibrations, as demonstrated by real-world examples after more than 20 years.

 

T

  • Thermal conductivity (lambda): The lower the thermal conductivity of an insulation material, the better it retains heat within the building. ISOCELL cellulose insulation is characterised by a particularly low thermal conductivity (design value 0.038 W/mK (AT/EU) or 0.039 W/mK (DE)).
  • Thermal insulation: Thermal insulation describes a building component’s ability to delay and minimise the transfer of thermal energy from the heated interior to the cold exterior. ISOCELL achieves outstanding performance thanks to its seamless installation and high flow resistance.

 

V

  • Vapour barrier: A layer on the room side that regulates the flow of water vapour and seals the heated interior space airtight. ISOCELL offers specialised solutions for this, such as the moisture-variable AIRSTOP DIVA or the paper-based ÖKO-NATUR vapour barrier.
  • Vibration test: A test procedure in which reference elements are subjected to severe vibrations to ensure resistance to settlement.

 

W

  • Whirlwind milling process: A particularly gentle manufacturing process for ISOCELL cellulose. Unlike other methods, this process ensures that the fibre structure remains long and intact, which significantly improves the matting and resilience (‘spring phenomenon’) of the building component.

 

Do you have any questions about our system solutions? Our construction engineering experts will be happy to advise you personally.