Item added to quote
Error occurred
Please try again later
AIRSTOP Pipe Seal
AIRSTOP Pipe Seal
AIRSTOP Pipe Seal is a rubber plate of permanently elastic EPDM with a hole in the centre. The hole size is selected so that a lip seal is created when the pipe is inserted, guaranteeing an airtight seal at the penetration point. Air-tight with age-resistant sealing plasters, guarantee that the construction is wind-tight and air-tight.
Available dimensions
| Article number | Width | Diameter | Length | Add |
|---|---|---|---|---|
| 3AIRRD50 | 120 mm | 50 mm | 120 mm |
|
| 3AIRRD100 | 160 mm | 100 mm | 160 mm |
|
| 3AIRRD125 | 180 mm | 125 mm | 180 mm |
|
| 3AIRRD150 | 250 mm | 150 mm | 250 mm |
|
Product data
Field of application
- pipe penetrations
Advantages
- extremely flexible
- resistant to ageing
- rubber heat-resistant to 120 °C (short-term)
AIRSTOP Pipe Seal is a rubber plate of permanently elastic EPDM with a hole in the centre. The hole size is selected so that a lip seal is created when the pipe is inserted, guaranteeing an airtight seal at the penetration point. Air-tight with age-resistant sealing plasters, guarantee that the construction is wind-tight and air-tight.
- Material composition
- EPDM rubber
- Temperature resistance
- -40–100 °C
- Working temperature
- -5–40 °C
- Colour
- Black
- Age resistance of adhesive
- 30 years
- Storage
- Cool and dry
Processing guideline
Info
Pull the rubber sleeve over the conduit and attach to the air-tight layer (vapour barrier, OSB,…) by the integrated sealing plaster. The diameter of the sleeve selected must have the appropriate dimension for the conduit entry point!The materials used must be free from dust and grease and substrates must be dry and supporting. The greater the pressure applied, the better the performance of the sealing plaster!
Important: To prevent the edge of the rubber hole from tearing, the cable ends should be deburred and the cables cleanly cut. As soon as the edge of the rubber hole tears, sealing is no longer possible!
Instructions
Info
Pull the rubber sleeve over the conduit and attach to the air-tight layer (vapour barrier, OSB,…) by the integrated sealing plaster. The diameter of the sleeve selected must have the appropriate dimension for the conduit entry point!The materials used must be free from dust and grease and substrates must be dry and supporting. The greater the pressure applied, the better the performance of the sealing plaster!
Important: To prevent the edge of the rubber hole from tearing, the cable ends should be deburred and the cables cleanly cut. As soon as the edge of the rubber hole tears, sealing is no longer possible!