Article marked
Error occurred Please try again later
Back to overview

AIRSTOP ULTRA UV 2.0 Adhesive tape

AIRSTOP ULTRA UV 2.0 Adhesive tape
LOGICO_FR_Innenraumemission_A+
ULTRA UV 2.0 Adhesive Tape is slightly expandable with adhesive generously applied, is suitable for a variety of bonding applications and can also be used on problematic substrates such as PP foils outdoors. Working temperature: from -5 °C

Available dimensions

Article number Roll width Roll length Colour Carton Inquiry List
3ULTRA1SP01 100 mm 25 m Black 6 rolls

Field of application

  • adhesion of vapour retarders and barriers
  • joins of OSB and DWD panels indoors and outdoors
  • joins and connections with wood, masonry and metal
  • bonding PP foils

Advantages

  • high proportion of adhesive
  • slightly expandable
  • adapts to the texture of the surface
  • very high UV-stability

Product data

To guarantee air and wind-tightness for the skin of a construction it must have the appropriate foils or panel materials providing a permanent seal at overlaps, gaps, joints and penetration points. ULTRA UV 2.0 Adhesive Tape is slightly expandable with adhesive generously applied, is suitable for a variety of bonding applications and can also be used on problematic substrates such as PP foils outdoors.
Material composition
Expandable acrylic adhesive tape with special film backing
Temperature resistance
-40 °C
Temperature resistance
80 °C
UV-resistance
Permanent in shadow joints of up to 50 mm
Working temperature
-5 °C
Working temperature
40 °C
Storage
2 years, cool and dry
UV-resistance uncovered
24 months

Processing guideline

DESCRIPTION

Expandable acrylic adhesive tape with special film backing.
DESCRIPTION

UV-stability

Max. 2 years outdoor exposure but permanent in shadow joints of up to 50 mm.

ADHESIVE FORCE

AIRSTOP adhesive tapes perform the function of airtight and wind-tight sealing and not that of positive bonding. Vapour barriers and other films must always be secured by staples, laths or the like (mechanical).

PLASTERING OVER

the AIRSTOP adhesive tapes cannot be plastered or painted over. Please use the AIRSTOP FLEX adhesive tape for this application.
null

BONDING AT VERY LOW TEMPERATURES

AIRSTOP adhesive tapes are suitable for bonding from approx. –5 °C. Note please that surface condensate can result at lower temperatures even in the case of minimal changes in temperature. This acts like a separating layer and decreases the adhesion. Hot-stored tapes provide noticeably improved initial adhesion. (fan heaters, insulated containers)

ADHERES TO THE FOLLOWING SUBSTRATES

Wood, wood-based panels (OSB, MDF, 3S-panels etc.), brick, plastics (smooth surface, free of silicones and waxes), metals free of oxides and rust etc.
Observe the system suggestions in accordance with our price list.

BONDING TIME

After the attachment of the AIRSTOP adhesive tape a so-called 'cross-linking process' takes place. This takes about 6 - 24 hours, depending on the temperature. Only then is the full adhesion attained.
null

STORAGE

Cool and dry in a closed cardboard box; do not stack rollers on top of one another without release paper in between.

DISPOSAL

Release paper and adhesive tape - domestic waste, waste tip

GUARANTEE

The acrylate adhesive employed does not contain any additives that cause the adhesive layer to become brittle and is therefore extremely resistant to aging.