Item added to quote
Error occurred
Please try again later
ALU DB 200 SK Vapour Barrier
ALU DB 200 SK Vapour Barrier
Aluminium coated vapour barrier for on-roof insulation. Full-surface adhesive.
Cover for construction period.
Cover for construction period.
Product data
Adhesive vapour barrier and airtight layer for roof-, wall and ceiling constructions. Professionally applied it prevents ingress of water vapour into the construction. For a limited time ALU DB 200 SK Vapour Retarder can function as a construction period cover.
- sd-value
- 1500 > m
- Elongation (EN 12311-1) lengthwise
- 20 %
- Elongation (EN 12311-1) crosswise
- 15 %
- Tensile strength (EN 12311-1) lengthwise
- 500 N/ 50 mm
- Tensile strength (EN 12311-1) crosswise
- 500 N/ 50 mm
- Tear propagation resistance (EN 12310-1) lengthwise
- 250 N
Processing guideline
Pose
Lay ALU DB SK on the sub-construction. The overlap should be approx. 10 cm. Pull off liner from the fully self-adhesive underlay and seal all overlaps and connections air-tight.If the membrane is intended to provide protection against the elements during the construction period and greater temperature differences or heavy strain through moisture on the membrane are expected, the joints must be secured additionally with OMEGA PLASTO. Lengthwise a joint must be made after max. 12 m with overlap + OMEGA PLASTO.
Surfaces must be free from grease, dust, oil, silicate, moisture and ice.
Instructions
Pose
Lay ALU DB SK on the sub-construction. The overlap should be approx. 10 cm. Pull off liner from the fully self-adhesive underlay and seal all overlaps and connections air-tight.If the membrane is intended to provide protection against the elements during the construction period and greater temperature differences or heavy strain through moisture on the membrane are expected, the joints must be secured additionally with OMEGA PLASTO. Lengthwise a joint must be made after max. 12 m with overlap + OMEGA PLASTO.
Surfaces must be free from grease, dust, oil, silicate, moisture and ice.
