Article marked
Error occurred
Please try again later
AIRSTOP Multi 6 cable sleeve
AIRSTOP Multi 6 cable sleeve
For sealing up to 6 cable and pipe penetrations. Application examples: Cable bundles, satellite cables, conduit bundles on wood, wood-based materials (e.g. OSB or MDF boards), metal and vapour barriers.
Working temperature: from -5° C
Anti-kink sleeve – strain relief of the cable penetration
Working temperature: from -5° C
Anti-kink sleeve – strain relief of the cable penetration
Available dimensions
| Article number | Dimension | for cable entry | for cable entry | Carton content | Inquiry List |
|---|---|---|---|---|---|
| 3AIRMFR | 320 x 320 mm | 16 mm | 25 mm | 4 Stk |
|
| 3AIRMFK | 230 x 230 mm | 4 mm | 11 mm | 4 Stk |
|
Product data
Field of application
- Cable penetration
Advantages
- Up to six cable penetrations possible with one sleeve
- Extremely flexible
- Resistant to ageing
- Integrated sealing plaster for airtight bonding
Self-adhesive sleeve for the reliable sealing of up to six penetrations through the airtight layer. Suitable for substrates such as vapour barriers, vapour control layers, roof underlays or climate membranes.
- Material composition
- PP block copolymer type, TPS-SEBS+PP, HDPE backing film, polyacrylate adhesive
- Temperature resistance
- -30–80 °C
- Working temperature
- 5–30 °C
- Colour
- White / red
- Storage
- Cool and dry
Processing guideline
INFO
Cut open the elastomer sleeve, pull it over the cables and adhere it to the airtight layer (vapour barrier, OSB, etc) with the integrated sealing plaster. The diameter of the selected sleeve must have the appropriate dimension for the penetration!Talcum powder or a lubricant can be used if necessary to ease the feeding of the cable/pipe through the sleeve.
The materials to be processed must be free of dust and grease, in addition to which the substrates must be dry and capable of bearing loads. The higher the contact pressure, the better the adhesion.
On highly porous and absorbent substrates such as concrete, plaster, untreated steel and rough timber, we recommend pre-treatment of the substrate with ISOCELL bonding primers.
Instructions
INFO
Cut open the elastomer sleeve, pull it over the cables and adhere it to the airtight layer (vapour barrier, OSB, etc) with the integrated sealing plaster. The diameter of the selected sleeve must have the appropriate dimension for the penetration!Talcum powder or a lubricant can be used if necessary to ease the feeding of the cable/pipe through the sleeve.
The materials to be processed must be free of dust and grease, in addition to which the substrates must be dry and capable of bearing loads. The higher the contact pressure, the better the adhesion.
On highly porous and absorbent substrates such as concrete, plaster, untreated steel and rough timber, we recommend pre-treatment of the substrate with ISOCELL bonding primers.