Item added to quote
Error occurred
Please try again later
OMEGA BG 1 Compressed Joint Tape
OMEGA BG 1 Compressed Joint Tape
Pre-compressed, impregnated foam tape for sealing of joints between components, such as around window installations, metal beams and timber wooden panels in timber frame construction. Resistant to wind-driven rain, UV-resistant.
Resistant to driven rain up to 600 Pa.
Resistant to driven rain up to 600 Pa.
Available dimensions
| Article number | Roll length | for joint width | for joint depth | Designation for ordering | Carton | Add |
|---|---|---|---|---|---|---|
| 3BG1102 | 12.5 m | 2 - 3 | 10 mm | 10 / 2 - 3 | 30 rolls |
|
| 3BG11202 | 12.5 m | 2 - 3 | 20 mm | 20 / 2 - 3 | 15 rolls |
|
| 3BG1103 | 10 m | 3 - 5 | 10 mm | 10 / 3 - 5 | 30 rolls |
|
| 3BG1154 | 8 m | 4 - 7 | 15 mm | 15 / 4 - 7 | 20 rolls |
|
| 3BG1256 | 5.6 m | 6 - 10 | 25 mm | 25 / 6 - 10 | 12 rolls |
|
| 3BG1306 | 5.6 m | 6 - 10 | 30 mm | 30 / 6 - 10 | 10 rolls |
|
| 3BG1258 | 4.3 m | 8 - 13 | 25 mm | 25 / 8 - 13 | 12 rolls |
|
| 3BG13010 | 3.3 m | 10 - 16 | 30 mm | 30 / 10 - 16 | 10 rolls |
|
Product data
Field of application
- for seals at overlaps, gaps and penetration points of membranes or boarding
Advantages
- permanent UV resistance
- seal against wind-driven rain up to 600 Pa
- free from chlorinated compounds, CFCs and halogen
To guarantee air and wind-tightness for the skin of a construction it must have the appropriate foils or panel materials providing a permanent seal at overlaps, gaps, joints and penetration points. Compressed Joint Tape OMEGA BG 1 is a pre-compressed polyurethane soft foam joint tape impregnated with an acrylate dispersion, available in various dimensions for gaps from 2mm to 50mm in building construction and civil engineering, for window installation, metal constructions, block house construction etc.
- Material composition
- compressed on rolls, adhesive on one side
- Temperature resistance
- -20–80 °C
- Gross density
- 85 (± 10%) kg/m³
- Colour
- Anthracite
- Rain-tightness
- ≥ 600 Pa
- UV-resistance
- durable
Processing guideline
Processing
For adhesion of the mounting aid to the surface the substrates must be free from dust and grease, also dry and supporting. The gaps must be free from construction dirt. Cut off end pieces, adding 2cm/m when cutting to length. Work on vertical gaps beginning at the bottom, butt-joint tape ends.The tape should be placed inwards 2 mm from the gap edge. Protect tape from standing in water!
Instructions
Processing
For adhesion of the mounting aid to the surface the substrates must be free from dust and grease, also dry and supporting. The gaps must be free from construction dirt. Cut off end pieces, adding 2cm/m when cutting to length. Work on vertical gaps beginning at the bottom, butt-joint tape ends.The tape should be placed inwards 2 mm from the gap edge. Protect tape from standing in water!
