Item added to quote

Error occurred Please try again later

OMEGA EXOFIX

OMEGA EXOFIX

UV-stabilised adhesive tape that can be plastered over for airtight connections and weather protection. Suitable for indoor and outdoor use. Good adhesion to uneven surfaces thanks to flexible, slightly stretchable backing.

Can be plastered over!
Working temperature: from -5° C

waterproof adhesive
slightly expandable
tear-resistant
can be plastered over and painted over
strong adhesion
12 months UV-resistance

Product data sheet

Available dimensions

Article number	Roll width	Roll length	Folding	Split liner	Carton
3OMEXO60	60 mm	25 m	-	-	8 rolls
3OMEXO80	80 mm	25 m	-	40/40	6 rolls
3OMEXO100VG	100 mm	25 m	15/85	15/42,5/42,5	6 rolls
3OMEXO140VG	140 mm	25 m	60/80	60/80	4 rolls
3OMEXO150	150 mm	25 m	-	75/75	2 rolls
3OMEXO200	200 mm	25 m	-	100/100	2 rolls
3OMEXO250VG	250 mm	25 m	30/220	30/110/110	2 rolls
3OMEXO300	300 mm	25 m	-	150/150	2 rolls

Request quote

Product data

Field of application

Bonding of PP OMEGA underlay membranes and façade membranes
Transitions and connections to wood, OSB, masonry, concrete, metals, etc.
For sealing the building connection joint in accordance with ÖNORM B 5320 and DIN 4108-7
adhesion of vapour retarders and airtight layers
For quick and easy creation of a second water-bearing layer below the window sill
Can be used for plinth sealing, exposure class “nicht drückendes Wasser”, in accordance with ÖNORM B 3692 or the guideline “Sockelanschluss im Holzhausbau”.
Weather protection for connections during construction phases, inside and outside
Bonding of OSB, MDF and soft wood fibre boards for indoor and outdoor applications.

Advantages

tear-resistant
can be plastered over and painted over
strong adhesion
tested for resistance to driving rain at 1050 Pa
tested for airtightness (HFA 21925/2026-FE)

OMEGA EXOFIX adhesive tape is characterised by its slight elasticity, high tear resistance and its suitability for plastering and painting over. The high adhesive content ensures a wide range of adhesion and reliable hold on various substrates. The flexible backing enables secure bonding even on uneven surfaces such as masonry or concrete. The special adhesive is also waterproof, ensuring a long-lasting, watertight finish.

Material composition: Non-woven backing with waterproof adhesive

sd-value: 2 m

Thickness: 0.5 mm

Temperature resistance: -40–80 °C

Working temperature: -5–40 °C

Shelf life: 2 years

Processing guideline

Description

Tear resistant system adhesive tapes with acrylate adhesive.

Adhesive force

Adhesive tapes perform the function of airtight and wind-tight sealing and not that of positive bonding. Vapour barriers and other films must always be secured by staples, laths or the like (mechanical).

Can be plastered over

The OMEGA EXOFIX adhesive tape can be plastered over and painted over. The tape can also be used in combination with OMEGA PoBit.

Bonding technique

When affixing the adhesive tape, the tape must be adhered over its entire surface to the substrate. The higher the contact pressure, the better the adhesion (AIRSTOP ROLL Pressing Roller, AIRSTOP RAK Plastic Squeegee). It is possible without problem to adhere the tape over itself or to adhere it crosswise. The materials to be processed must be free of dust and grease, in addition to which the substrates must be dry and capable of bearing loads. In the case of doubt we recommend the pre-treatment of the substrate. (UNI Primer or BUBI LF Adhesive Primer).

Bonding at very low temperatures

Adhesive tapes are suitable for bonding from approx. –5 °C. Note please that surface condensate can result at lower temperatures even in the case of minimal changes in temperature. This acts like a separating layer and decreases the adhesion. Hot-stored tapes provide noticeably improved initial adhesion. (fan heaters, insulated containers)

Adheres to the following substrates

Wood, wood-based panels (OSB, MDF, 3S-panels etc.), brick, plastics (smooth surface, free of silicones and waxes), metals free of oxides and rust etc.
Observe the system suggestions in accordance with our price list.

Bonding time

After the attachment of the adhesive tape a so-called 'cross-linking process' takes place. This takes about 6 - 24 hours, depending on the temperature. Only then is the full adhesion attained.

Removal of the adhesive tape

Warm up the adhesive tape with a hair dryer and pull slowly on the adhesive tape. Remove the last residues with AIRSTOP ADC adhesive cleaner. Caution: do not rub for too long in one place on sensitive substrates. If necessary, wait 5 - 15 minutes and spray AIRSTOP ADC adhesive cleaner on once again and wipe it off.

Storage

Cool and dry in a closed cardboard box; do not stack rollers on top of one another without release paper in between.

Disposal

Release paper and adhesive tape - domestic waste, waste tip

Guarantee

The acrylate adhesive employed does not contain any additives that cause the adhesive layer to become brittle and is therefore extremely resistant to aging.

Instructions