Item added to quote
Error occurred
Please try again later
OMEGA MONO LIGHT SK DUO
OMEGA MONO LIGHT SK DUO
A vapour-permeable roofing membrane with two alternating strips of acrylate adhesive for direct installation on thermal insulation or timber battens. The monolithic membrane ensures superior UV resistance and extremely high resistance to driving rain. Suitable for bonded underlay / under-membrane Class 3 in accordance with ZVDH.
Available dimensions
| Article number | Roll width | Roll length | Rolls / Pallet | Total area | Add |
|---|---|---|---|---|---|
| 2MONOLSK | 1.5 m | 50 m | 30 rolls | 2250 m² |
|
Product data
Field of application
- For ventilated pitched roofs
- For ventilated closed facades
- Weather protection
Advantages
- rain-tight, wind-tight
- uv-stabilized
- easy to cut
- anti-glare
- anti-slip
This is a vapour-permeable roofing membrane with two alternating strips of acrylate adhesive for direct installation on top of the thermal insulation or timber formwork. The monolithic membrane ensures greater UV resistance and extremely high resistance to driving rain. Water vapour transport through the functional film no longer takes place via capillary action, but is actively transported from the inside to the outside through the non-porous membrane. The roofing membrane therefore remains waterproof and UV-resistant even when exposed to wood preservatives, chainsaw oils or resins.
- Outdoor exposure wall
- 5 months* (9 months’ use as temporary construction site fencing with no subsequent use).
- Outdoor exposure pitched roofs from 14°
- 8 weeks
- sd-value
- 0.075 m
- Material composition
- monolithic membrane with PP fleece on both sides and two alternating acrylate adhesive strips
- Elongation (EN 12311-1) lengthwise
- 40 - 110 %
- Elongation (EN 12311-1) crosswise
- 60 - 120 %
Processing guideline
(1) Underlay (unsupported)
OMEGA Roof Underlay is nailed parallel to the eaves with a slight drape and laid and mechanically fixed above the rafters. Vertical overlaps/joins must always lie on a rafter.All overlaps must be bonded with OMEGA QUILLI Sealing Compound. Horizontal underlay panels can be joined using SK DUO adhesion as provided or with OMEGA QUILLI Sealing Compound.
(2) Underlay (supported)
The roofing membrane is laid on formwork parallel to the eaves as underlay. The sheets are nailed concealed at the ridge edges at a distance of 10 cm (marking edge). All overlaps/connections must be sealed with AIRSTOP ULTRA, AIRSTOP FLEX or the integrated adhesive strips (with sufficient contact pressure).The perforation protection requires sufficient pressure between the counter batten and the roofing membrane.
(3) Eaves construction
We recommend an eaves construction with drainage below the gutter so that snowmelt build-up can easily drain off. We recommend the use of a metal sheet to drain off water.
(4) Ridge area
The ridge area is closed directly when covered with OMEGA roof underlay. This provides immediate protection against water penetration. In non-insulated lofts and/or ventilated interior insulation the ridge formation must be made open: the blankets end 3 cm before the ridge apex, counter battens are mounted and a 50 cm wide strip of OMEGA roof underlay must be attached over the roof apex.
(5) Valley information
The first step in valley formation is to lay a continuous valley blanket.
(6) Penetrations
Sections cut out for roof penetrations (extractor pipes, roof windows, chimneys, etc.) should be kept as small as possible and the ends of the sheets must be fixed so that no rain or snow can penetrate. To achieve a perfect seal the suitable adhesive technology by ISOCELL GmbH & Co KG must be used.Make sure that the substrate is clean! The manufacturer can accept no liability for mechanical damage. The applicable regulations and guidelines (e.g. of the ZVDH (Central Association of German Roofers) for Germany, Austrian Standard, ÖNORM B 4119, for Austria, ...) must be observed!
The impermeability of micro-porous webs can be impaired by wood preservatives, chainsaw oil or oily substances. Our application technicians will be glad to inform you!
The roof underlay does not replace roof covering. The roof must be covered during the period of the specified weathering time. Early covering has a positive effect on the resistance to ageing.
Instructions
(1) Underlay (unsupported)
OMEGA Roof Underlay is nailed parallel to the eaves with a slight drape and laid and mechanically fixed above the rafters. Vertical overlaps/joins must always lie on a rafter.All overlaps must be bonded with OMEGA QUILLI Sealing Compound. Horizontal underlay panels can be joined using SK DUO adhesion as provided or with OMEGA QUILLI Sealing Compound.
(2) Underlay (supported)
The roofing membrane is laid on formwork parallel to the eaves as underlay. The sheets are nailed concealed at the ridge edges at a distance of 10 cm (marking edge). All overlaps/connections must be sealed with AIRSTOP ULTRA, AIRSTOP FLEX or the integrated adhesive strips (with sufficient contact pressure).The perforation protection requires sufficient pressure between the counter batten and the roofing membrane.
(3) Eaves construction
We recommend an eaves construction with drainage below the gutter so that snowmelt build-up can easily drain off. We recommend the use of a metal sheet to drain off water.
(4) Ridge area
The ridge area is closed directly when covered with OMEGA roof underlay. This provides immediate protection against water penetration. In non-insulated lofts and/or ventilated interior insulation the ridge formation must be made open: the blankets end 3 cm before the ridge apex, counter battens are mounted and a 50 cm wide strip of OMEGA roof underlay must be attached over the roof apex.
(5) Valley information
The first step in valley formation is to lay a continuous valley blanket.
(6) Penetrations
Sections cut out for roof penetrations (extractor pipes, roof windows, chimneys, etc.) should be kept as small as possible and the ends of the sheets must be fixed so that no rain or snow can penetrate. To achieve a perfect seal the suitable adhesive technology by ISOCELL GmbH & Co KG must be used.Make sure that the substrate is clean! The manufacturer can accept no liability for mechanical damage. The applicable regulations and guidelines (e.g. of the ZVDH (Central Association of German Roofers) for Germany, Austrian Standard, ÖNORM B 4119, for Austria, ...) must be observed!
The impermeability of micro-porous webs can be impaired by wood preservatives, chainsaw oil or oily substances. Our application technicians will be glad to inform you!
The roof underlay does not replace roof covering. The roof must be covered during the period of the specified weathering time. Early covering has a positive effect on the resistance to ageing.
