Article marked
Error occurred Please try again later
Back to overview

AIRSTOP D1 Cable Sleeve

AIRSTOP D1 Cable Sleeve
For the permanent airtight sealing of cable penetrations. This product is extremely flexible and resistant to ageing. Working temperature: from -5 °C

Available dimensions

Article number Type Width Length for cable entry for cable entry Carton content Inquiry List
3AIRD1K D1 150 mm 150 mm 4 mm 6 mm 30 Stk
3AIRD1 D1 150 mm 150 mm 8 mm 12 mm 30 Stk

Field of application

  • cable entry points

Advantages

  • extremely flexible
  • resistant to ageing
  • integrated sealing plaster for air-tight adhesion
  • rubber heat-resistant up to 160°C (short-term)

Product data

To enable vapour retarders and other materials to fulfil their purpose as airtight layer in a construction these must also have air-tight joins at cable entry points. Warm air finds its way inside a building component through even the smallest of holes in the vapour retarder, where it then condenses. AIRSTOP Cable Sleeves, sealed airtight with age-resistant sealing plasters, guarantee that the construction is wind-tight and air-tight.
Material composition
EPDM rubber, sealing plaster with age-resistant pure acrylate adhesive
Colour
Black, sealing plaster white with green AIRSTOP imprint
Temperature resistance
-40 °C
Temperature resistance
100 °C
Working temperature
-5 °C
Working temperature
40 °C
Age resistance of adhesive
30 years
Storage
Cool and dry

Processing guideline

INFO

Pull the rubber sleeve over the conduit and attach to the air-tight layer (vapour barrier, OSB,…) by the integrated sealing plaster. The diameter of the sleeve selected must have the appropriate dimension for the conduit entry point!
Talcum powder or a lubricant can be used if necessary to ease the feeding of the cable/pipe through the sleeve.
The materials used must be free from dust and grease and substrates must be dry and supporting.
The greater the pressure applied, the better the performance of the adhesive tape.
On highly porous and very absorbent substrates such as concrete, plaster, untreated steel or raw wood, we recommend pre-treatment of the substrate with our ISOCELL Primers.
INFO