Article marked
Error occurred Please try again later
Back to overview

AIRSTOP FLEX Sealing Patches

AIRSTOP FLEX Sealing Patches
LOGICO_FR_Innenraumemission_A+
A tear-resistant adhesive patch with adhesive generously applied. Suitable forsealing holes in a variety of substrates, indoors and out. It is suitable for applyingto substrates such as plywood, osB and membranes. Working temperature: from -5 °C

Available dimensions

Article number Width Length Piece / roll Carton Inquiry List
3FLEXPF1 180 mm 180 mm 222 Stk 4 rolls
3FLEXPF2 200 mm 200 mm 200 Stk 4 rolls

Field of application

  • a quick seal for larger openings e.g. blow-in openings

Advantages

  • quick and easy application
  • strong adhesion

Product data

To guarantee air and wind-tightness for the skin of a construction it must have the appropriate foils or panel materials providing a permanent seal at overlaps, gaps, joints and penetration points. AIRSTOP FLEX Sealing Plaster is tear-resistant with adhesive generously applied, and is suitable for a variety of bonding applications.
Material composition
Slightly expandable synthetic base material, laminated airtight, acrylate adhesive
Colour
White transparent with AIRSTOP imprint
Temperature resistance
-40 °C
Temperature resistance
100 °C
UV-resistance
2 months
Working temperature
from
Working temperature
-5 °C
Storage
2 years; cool and dry

Processing guideline

INFO

The materials used must be free from dust and grease and substrates must be dry and supporting.
The greater the pressure applied, the better the performance of the adhesive tape.
Sealing Plaster has the function of sealant and not of a firm connector (No permanent tensile stresses may act on the bonded joints – e.g. if the drill cores of OSB boards are re-inserted, they must be mechanically fixed). The pure acrylate adhesive used does not contain resins or other additives that could cause the adhesive film to become brittle and therefore this product is extremely resistant to ageing.
INFO