Article marked
Error occurred Please try again later
Back to overview

ISOblow PROFI 230

ISOblow PROFI 230
The ISOBlow PROFI 230 is an extremely high-performance blowing machine for the installation of cellulose insulation, soft wood fibre, glass wool and rock wool besides other aproved loose and free-flowing insulation material. Two high-power blowers ensures high air flow and high output pressure. The two blowers are supported by two extra blowers that can be switched on as required and are controlled via radio remote controls.

Available products

Article number Typ Inquiry List
610100 ISOblow PROFI 230

Advantages

  • Large hopper with four shredder shafts
  • The storage container is with lid for dust reduction
  • Simple filling via loading flap
  • Hopper is detachable
  • 5-chamber airlock with abrasion-resistant rubber seals. No loss of pressure – minimum wear-and-tear
  • 5-step VTG turbine – very high air input and low-noise
  • Operation is easy via radio remote control
  • Material quantity can be controlled via: electronic Material pusher and sluice speed (optional) by radiocontrol
  • Shredder speed regulated on switchbox
  • Ventilated airlock
  • Can be transported with a manual pallet lift, can be lifted from all 4 sides
  • 2 x 230 V luminous flux - constant high output
  • Suction possible in combination with ISOCELL suction bin
  • Ease of maintenance due to ergonomically friendly design
  • Securing rings for fastening machine

Product data

The ISOblow PROFI 230 is an extremely high-performance blowing machine for the installation of cellulose insulation, soft wood fibre, glass wool and rock wool besides other aproved loose and free-flowing insulation material. The insulation is loosened twice: first by the four large shredder shafts in the hopper and then via three small shredder shafts directly above the airlock. Two high-power blowers ensures high air flow and high output pressure. The two blowers are supported by two extra blowers that can be switched on as required and are controlled via radio remote controls. ISOblow PROFI 230 is operated, together with the material and air flow, via ISOCELL’s radio remote control – practical and time-saving. In addition the material volume can also be regulated via a slide-gate above the airlock (rough setting). An ideal feature of ISOblow PROFI 230 are the many fine settings like rotation agitators, additional agitators or airlock. These settings are ideal for special application like acoustic spraying or working with wood fibre or mineral wool.
Width
1010 mm
Length
1380 mm
Height
1800 mm
Weight- kg
470 kg
Capacity
1191 l
Electrical connection load
2 x 230 V / 50 Hz, 16 A; optional 1x 230 V, 16 A
Blower
2 x 1,9 kW + 2 x 1,70 kW
Airlock drive
1,1 kW
Agitator
1,1 kW
Additional chopping performance
0,55 kW
Total output
9,65 kW
Max. air output
650 mbar
Max. air volume
400 m³/h
ISOCELL radio remote control
Air and material quantity control via radio
Hose connection
3" (76 mm)
Oben blow
1600 kg/ h
Dense blow
1000 kg/ h
Roof
≤ 50 cm
Wall
≤ 40 cm