ISOCELL Logo
Article marked
Error occurred Please try again later
Back to overview

ISOWINDOW FEBA SOFT WS

ISOWINDOW FEBA SOFT WS
LOGICO_FR_Innenraumemission_A+ LOGICO_I_WS__EN
The tape consists of a fleece structure that can be plastered over and is coated with a high-performance adhesive. The back is completely adhesive and has split liners. The tape is suitable for bonding to the window assembly. Can be plastered and painted over. Working temperature: from -5 °C
  • FINGERLIFT
  • EASY TO DETACH

Available dimensions

Article number Type Roll width Roll length Split liner Carton Inquiry List
3FEBA75 WS 75 mm 25 m 25 / 50 6 rolls
3FEBA100 WS 100 mm 25 m 35 / 65 4 rolls

Field of application

  • for window installation

Advantages

  • „fingerlift“
  • soft flexible structure
  • extremely strong adhesion on all types of window
  • frame and various substrates e.g. concrete, plaster, OSB, wood, vapour barriers…
  • alternating adhesive coating for concealed fitting
  • split liners
  • flexibility for movement of building component
  • can be plastered and painted over

Product data

The window tape two-way consists of a fleece structure that can be plastered over and is coated with a high-performance adhesive. The back is completely adhesive and has split liners. The adhesive strip covering the surface can be attached directly to the window frame without detaching a liner and the tape is completely concealed when embedded.
Material composition
Flexible fleece, laminated air-tight
Colour
White
sd-value
7 m
Temperature resistance
-40 °C
Temperature resistance
80 °C
UV-resistance
6 months
Working temperature
-5 °C
Working temperature
40 °C
Storage
12 years; cool and dry

Processing guideline

INFO

ISOWINDOW FEBA SOFT WS is attached to the window frame before the window is installed. The fleece side of the tape can be plastered and painted over. The adhesive side is attached to the wall, wood, OSB or vapour barrier.
INFO

(1)

The fleece side of ISOWINDOW is covered with a narrow acrylic adhesive strip that can be attached directly to the window frame without removing a liner.
(1)

(2)

Lay the window frame with the inside facing upwards. Press the mounting strip carefully onto the window frame. Roll the ISOWINDOW along as far as the corner.
(2)

(3)

Make a fold at the corners. Do this by pressing the window tape firmly as far as the corners of the window frame, push the material along and make a fold. These ‘corners’ are to ensure tightness at the corners.
(3)

(4)

When the window tape is attached to the entire window frame and the joint insulated, pull off the wide masking paper and press onto the window frame.
The more pressure applied, the better the adhesion (AIRSTOP ROLL Pressing Roller, AIRSTOP RAK Plastic Squeegee)!
(4)

Videos