Article marked

Error occurred Please try again later

ISOWINDOW UVAU ES

ISOWINDOW UVAU ES

Provides a quick and reliable seal and vapour diffusion permeable seal for window connection joints. The tape consists of highly UV-resistant backing that can be plastered over and painted over and is fully coated with a quality acrylic adhesive.

Can be plastered over.
Working temperature: from -5 °C

fingerlift
easy to detach
12 months UV stability

Product data sheet

Available dimensions
Product data
Processing guideline
Downloads

ISOWINDOW UVAU ES

Available dimensions
Product data
Processing guideline
Downloads

Available dimensions

Article number	Type	Roll width	Roll length	Split liner	Carton		Inquiry List
3UVAUSK80	ES	80 mm	25 m	20 / 60	4 rolls
3UVAUSK100	ES	100 mm	25 m	20 / 80	4 rolls

Show Inquiry List

Product data

Field of application

for window installation outside

Advantages

reversed-system
fingerlift
12 months UV-resistance
resistance to air and wind-driven rain
soft, flexible structure
various substrates, e.g. concrete, OSB, wood, vapour barriers
can be plastered over and painted over

Window Tape one-sided provides a quick and reliable seal and vapour diffusion permeable seal for window connection joints. The tape consists of highly UV-resistant backing that can be plastered over and painted over and is fully coated with a quality acrylic adhesive. ISOWINDOW UVAU ES Window Tape is ideal for window installation that is conform with RAL and ÖNORM B 5320.

Material composition

PP / PU compound

sd-value

0.19 m

Temperature resistance

-40–80 °C

Working temperature

-5–40 °C

Shelf life

12 months

Colour

Grey with black imprint

Processing guideline

INFO

ISOWINDOW UVAU ES Window Tape is attached to the window frame after installation. The grey fleece side of the tape can be plastered over and painted over and must face outwards. The wide adhesive surface of the tape is attached to the wall, wood, OSB or vapour barrier.

(1)

Cut the window tape with approx. 12 cm extra length. Pull the masking paper off the adhesive strip and press the adhesive tape carefully onto the window frame.

(2)

Make a fold or loop at the corners. To do so, press the window tape firmly to the window frame as far as the corner, then lift slightly, push the material along and turn 90 °.

(3)

Now continue to press the window tape onto the window frame. The ‘corner’ fold seals the corners optimally. Do this at every corner.

(4)

When the window tape is attached to the entire window frame and the joint insulated, pull off the wide masking paper and press onto the window frame.
The more pressure applied, the better the adhesion (AIRSTOP ROLL Pressing Roller, AIRSTOP RAK Plastic Squeegee)!

Instructions

INFO

(1)

Cut the window tape with approx. 12 cm extra length. Pull the masking paper off the adhesive strip and press the adhesive tape carefully onto the window frame.

(2)

Make a fold or loop at the corners. To do so, press the window tape firmly to the window frame as far as the corner, then lift slightly, push the material along and turn 90 °.

(3)

Now continue to press the window tape onto the window frame. The ‘corner’ fold seals the corners optimally. Do this at every corner.

(4)

Downloads

Product data sheet Product data sheet pdf 811 KB

Downloads

Documents