Article marked
Error occurred
Please try again later
PEMIFO Wall Insulation Membrane
PEMIFO Wall Insulation Membrane
PEMIFO Wall Insulation Membrane with approx. 0.3 mm thickness is a 1-layer plastic membrane.
- Can be used for corner installation
- Non-slip
Available dimensions
| Article number | Roll width | Roll length | Carton | Inquiry List |
|---|---|---|---|---|
| 3BAHN2 | 130 mm | 50 m | 8 rolls |
|
| 3BAHN6 | 160 mm | 50 m | 8 rolls |
|
| 3BAHN1 | 175 mm | 50 m | 8 rolls |
|
| 3BAHN7 | 200 mm | 50 m | 8 rolls |
|
| 3BAHN | 240 mm | 50 m | 8 rolls |
|
| 3BAHN12 | 300 mm | 50 m | 4 rolls |
|
| 3BAHN8 | 350 mm | 50 m | 4 rolls |
|
Product data
Field of application
- Suitable as a moisture barrier below the screed. Separating layer between wood and other construction material.
Advantages
- Can be used for corner installation
- Non-slip
PEMIFO Wall Insulation Membrane with approx. 0.3 mm thickness is a 1-layer plastic membrane.
- Material composition
- LDPE film
- Thickness
- 0.3 mm
- Weight
- 276 g/m²
- Colour
- Black
- Storage
- cool and dry
- Oberfläche
- smooth
Processing guideline
Info
Membrane width must be selected so that the membrane can be pulled up on both sides of a wall. The edges of PEMIFO Wall Insulation Membrane should overlap by min. 10 cm. The contact surfaces must be levelled resulting in a level surface with no unevenness.
Instructions
Info
Membrane width must be selected so that the membrane can be pulled up on both sides of a wall. The edges of PEMIFO Wall Insulation Membrane should overlap by min. 10 cm. The contact surfaces must be levelled resulting in a level surface with no unevenness.