Article marked
Error occurred Please try again later
Back to overview

OMEGA Alu-Butyl FRGD Flexible Pipe Sleeve

OMEGA Alu-Butyl FRGD Flexible Pipe Sleeve
For the permanent airtight sealing of penetrations around pipes. For use on softfibreboard, concrete, roof underlay etc., indoors and outdoors. If necessary, use a primer! For the permanent airtight sealing of penetrations around pipes in roof pitches up to 45°. Working temperature: from + 5 °C

Available dimensions

Article number Type Width Length for cable entry for cable entry Carton content Inquiry List
3OMFRGD100A FRGD 350 mm 350 mm 100 mm 125 mm 4 Stk
3OMFRGD150A FRGD 350 mm 350 mm 150 mm 165 mm 4 Stk

Field of application

  • openings for conduits
  • openings in Roof sloping

Advantages

  • extremely flexible, for roofs with greater slope
  • resistant to UV
  • integrated butyl- sealing plaster
  • rubber heat-resistant up to 160 °C (short-term)

Product data

A fast and permanent sealant for penetrations in bitumen vapour retarders, roofing membrane, soft fibreboard, OSB, under-roof sheathing, concrete floors etc. The high-stretch EPDM sleeve has a butyl adhesive collar, provides extremely strong adhesion and is tear resistant. At the same time it gives the required strain relief. The aluminium coating makes the sleeve water repellent and UV-resistant.
Material composition
EPDM rubber with pure butyl adhesive collar, aluminiom coated
Colour
Black, adhesive collar alu
Temperature resistance
-40 °C
Temperature resistance
100 °C
Working temperature
5 °C
Working temperature
40 °C
Storage
Cool and dry

Processing guideline

INFO

Pull the rubber sleeve over the pipe and stick to the substrate with the integrated sealing plaster. The diameter of the selected pipe sleeve must have the appropriate dimension for the pipe feed-through!
The materials used must be free from dust and grease and substrates must be dry and supporting.
The greater the pressure applied, the better the performance of the adhesive tape.
On highly porous and very absorbent substrates such as concrete, plaster, untreated steel or raw wood, we recommend pre-treatment of the substrate with our ISOCELL Primers.
INFO