Article marked
Error occurred
Please try again later
OMEGA Alu-Butyl RGD Pipe Sleeve
OMEGA Alu-Butyl RGD Pipe Sleeve
For the permanent airtight sealing of penetrations around pipes. For use on softfibreboard, concrete, roof underlay etc., indoors and outdoors. If necessary, use a primer!
Working temperature: from + 5 °C
Working temperature: from + 5 °C
Available dimensions
| Article number | Type | Width | Length | for cable entry | for cable entry | Carton content | Inquiry List |
|---|---|---|---|---|---|---|---|
| 3OMRGD50A | RGD 50 A | 228 mm | 228 mm | 50 mm | 70 mm | 4 Stk |
|
| 3OMRGD75A | RGD 75 A | 228 mm | 228 mm | 75 mm | 90 mm | 4 Stk |
|
| 3OMRGD100A | RGD 100 A | 320 mm | 320 mm | 100 mm | 110 mm | 4 Stk |
|
Product data
Field of application
- openings for conduits
Advantages
- resistant to UV
- rubber heat-resistant up to 160°C (short-term)
- integrated butyl- sealing plaster for air- and windproof bonding
A fast and permanent sealant for penetrations in bitumen vapour retarders, roofing membrane, soft fibreboard, OSB, under-roof sheathing, concrete floors etc. The high-stretch EPDM sleeve has a butyl adhesive collar, provides extremely strong adhesion and is tear resistant. At the same time it gives the required strain relief. The aluminium coating makes the sleeve water repellent and UV-resistant.
- Material composition
- EPDM rubber with pure butyl adhesive collar, aluminium coated
- Temperature resistance
- -40–100 °C
- Working temperature
- 5–40 °C
- Colour
- Black, adhesive collar aluminium
- Storage
- cool and dry
Processing guideline
INFO
Pull the rubber sleeve over the pipe and stick to the substrate with the integrated sealing plaster. The diameter of the selected pipe sleeve must have the appropriate dimension for the pipe feed-through!The materials used must be free from dust and grease and substrates must be dry and supporting.
The greater the pressure applied, the better the performance of the adhesive tape.
On highly porous and very absorbent substrates such as concrete, plaster, untreated steel or raw wood, we recommend pre-treatment of the substrate with our ISOCELL Primers.
Instructions
INFO
Pull the rubber sleeve over the pipe and stick to the substrate with the integrated sealing plaster. The diameter of the selected pipe sleeve must have the appropriate dimension for the pipe feed-through!The materials used must be free from dust and grease and substrates must be dry and supporting.
The greater the pressure applied, the better the performance of the adhesive tape.
On highly porous and very absorbent substrates such as concrete, plaster, untreated steel or raw wood, we recommend pre-treatment of the substrate with our ISOCELL Primers.