Article marked
Error occurred
Please try again later
OMEGA QSM Welding Agent
OMEGA QSM Welding Agent
Solution welding compound for homogeneous wind and water-tight welding of OMEGA UDOs 330 Roof underlay.
Yield: ~ 140 lfm/l
Working temperature: from 0 °C
Yield: ~ 140 lfm/l
Working temperature: from 0 °C
Available dimensions
| Article number | Packing unit | Colour | Content | Carton | Inquiry List |
|---|---|---|---|---|---|
| 3QSM | Can | colourless | 1 l | 6 Cans |
|
Product data
Field of application
- for homogenous wind and watertight welding of OMEGA UDOs 330 Roof underlay
Advantages
- one-component
- contains solvent
- ready for use
For homogenous wind and water-tight welding of OMEGA UDOs 330 Roof underlay.
- Material composition
- Tetrahydrofuran
- Coverage
- 7 ml/m
- Density - g/cm³
- 0.89 g/cm³
- Consistency
- liquid
- Storage
- at room temperature
- Solvent content
- organic solvent 99,9 %
Processing guideline
Apply the solution OMEGA QSM Welding Agent using the bottle with brush (min. 4 cm welding seam). Immediately place the overlapping sheets on top of each other and press on lightly with the back of the hand. Without delay press on firmly at right angles to the direction of the seam using a roller (to prevent formation of folds).
Observe safety instructions! We recommend that protective goggles are worn during work.
Observe safety instructions! We recommend that protective goggles are worn during work.
Instructions
Apply the solution OMEGA QSM Welding Agent using the bottle with brush (min. 4 cm welding seam). Immediately place the overlapping sheets on top of each other and press on lightly with the back of the hand. Without delay press on firmly at right angles to the direction of the seam using a roller (to prevent formation of folds).
Observe safety instructions! We recommend that protective goggles are worn during work.
Observe safety instructions! We recommend that protective goggles are worn during work.