Article marked
Error occurred Please try again later
Back to overview

TIMBERFLEX Sealing Patches

TIMBERFLEX Sealing Patches
LOGICO_TIMBERFLEX_Dichtpflaster_EN LOGICO_FR_Innenraumemission_A+
The TIMBERFLEX Sealing plaster patches in wood optics a tear-resistant adhesive patch with adhesive generously applied. Suitable for quick sealing of holes. The patches are numbered in ascending order. Working temperature: from -5° C
  • TIMBERFLEX SEALING PLASTER Patches in wood optics

Available dimensions

Article number Width Length Piece / roll Carton Inquiry List
3VLIESPF2 200 mm 200 mm 200 Stk 4 rolls

Field of application

  • a quick seal for larger openings e.g. blow-in openings

Advantages

  • quick and easy application
  • strong adhesion

Product data

To guarantee air and wind-tightness for the skin of a construction it must have the appropriate foils or panel materials providing a permanent seal at overlaps, gaps, joints and penetration points. TIMBERFLEX Sealing Plaster is tear-resistant with adhesive generously applied, and is suitable for a variety of bonding applications.
Material composition
Slightly expandable synthetic base material, laminated airtight, acrylate adhesive
Colour
Beige
Temperature resistance
-40 °C
Temperature resistance
100 °C
Working temperature
from
Working temperature
-5 °C
Storage
2 years; cool and dry

Processing guideline

INFO

The materials used must be free from dust and grease and substrates must be dry and supporting.
The greater the pressure applied, the better the performance of the adhesive tape.
Sealing Plaster has the function of sealant and not of a firm connector (No permanent tensile stresses may act on the bonded joints – e.g. if the drill cores of OSB boards are re-inserted, they must be mechanically fixed). The pure acrylate adhesive used does not contain resins or other additives that could cause the adhesive film to become brittle and therefore this product is extremely resistant to ageing.
INFO