Article marked
Error occurred
Please try again later
UNI Primer
UNI Primer
A solvent-based synthetic-resin primer, for preparation of porous substrates such as masonry and concrete to optimise the bond of cold-setting adhesive tapes, and cold self-adhesive roof underlays. Penetrates up to 3mm into the surface. Fast curing.
Particularly recommended in winter!
Yield: Approx. 5 m²/litre
Working temperature: from – 10 °C
Particularly recommended in winter!
Yield: Approx. 5 m²/litre
Working temperature: from – 10 °C
Available dimensions
| Article number | Content | Carton | Inquiry List |
|---|---|---|---|
| 3ALLW1 | 1 l | 9 Cans |
|
| 3ALLW5 | 5 l | 1 Cans |
|
Product data
Advantages
- a stronger primer coat
- working temperature from -10° C
- resistant to + 100° C
- quick drying and economical in use
- recommended especially in winter
UNI Primer is a quality, solvent-based synthetic-resin primer for preparation of the substrate to optimize the adhesive properties of cold-setting adhesive tapes, cold self-adhesive roof underlays etc. It can be used on all absorbent mineral substrates e.g. concrete, bricks, wood, etc. Advantages compared with bitumen primer: temperature resistance up to 100°C and can also be used at -10°C; it penetrates 3mm into the surface and forms a firm bond between material and adhesive; quick drying: in summer approx. 15 min., in winter 30- 45 min.;
- Temperature resistance
- 100 °C
- Working temperature
- -10–35 °C
- Drying time Summer / Winter
- 10 min / 30 - 45 min
- Coverage
- 5 m² / Liter
- Storage
- 12 months in closed can; Attention: it is easily inflammable
Processing guideline
APPLICATION
The substrate must be level, firm, dry, free from grease, oil and dust. Apply UNI Primer evenly using a roller or a brush (spread on porous surfaces twice) and allow to dry.Use only in ventilated places!
Protective gloves and goggles must be worn as protection against the solvent!
Instructions
APPLICATION
The substrate must be level, firm, dry, free from grease, oil and dust. Apply UNI Primer evenly using a roller or a brush (spread on porous surfaces twice) and allow to dry.Use only in ventilated places!
Protective gloves and goggles must be worn as protection against the solvent!