Article marked
Error occurred Please try again later
Back to overview

AIRSTOP FLEX FEE Adhesive Tape

AIRSTOP FLEX FEE Adhesive Tape
Slightly malleable adhesive tape for permanent airtight bonding. Can be plastered and painted over. Thanks to its split-back lining, it is particularly suitable for the bonding of corners and transitions as well as for window installations in compliance with RAl and ÖNORM B 5320. Can be plastered over Working temperature: from -5° C

Available dimensions

Article number Roll width Roll length Split liner Carton Inquiry List
3AFLEX60G 60 mm 25 m 12 / 48 8 rolls

Field of application

  • corner adhesion and material intersections
  • a seal for building joints (window)

Advantages

  • extremely high-performance adhesive on all types of window frames and a variety of substrates such as concrete, plaster, OSB, wood, vapour barriers…
  • separate liner
  • tear-resistant and hard-wearing
  • can be plastered and painted over

Product data

To ensure the air and wind-tightness of a building’s shell the membranes or sheeting materials used must be permanently sealed at overlaps, gaps, joins and penetrations areas. AIRSTOP FLEX FEE Adhesive Tape is flexible, tear-resistant, can be plastered over and painted over and has a high adhesive content with a highperformance adhesive. The adhesive tape’s backing with separate liners means that the tape is particularly suitable for adhesion at corners, intersections and for window installation conforming to RAL and ÖNORM B 5320.
Material composition
Flexible fleece, laminated air-tight
Colour
Transparent white with green AIRSTOP imprint
sd-value
5 m
Temperature resistance
-40 °C
Temperature resistance
80 °C
UV-resistance
2 months
Working temperature
-5 °C
Working temperature
40 °C
Shelf life
2 years
Storage
Cool and dry

Processing guideline

INFO

AIRSTOP FLEX FEE is attached to the window frame after the window has been installed. The fleece side of the tape can be plastered over and painted over. The self-adhesive side is fixed to the wall, wood, OSB or vapour barrier (if necessary pre-treat surfaces with BUBI LF Adhesive Primer).
The materials used must be free from dust and grease and substrates must be dry and supporting.
INFO

(1) CUTTING TO SIZE AND ADHESION

Cut AIRSTOP FLEX FEE Adhesive Tape with approx. 12 cm excess length. Pull the narrow backing paper off the tape and attach the tape carefully to the window frame.
(1) CUTTING TO SIZE AND ADHESION

(2) CORNER FITTING

At the corners cut into the adhesive tape with a cutter and attach round the corner. If the tape does not fit firmly in the corner it can be re-finished using UNI MS Sealant Adhesive or AIRSTOP SPRINT Sealant .
(2) CORNER FITTING

(3) WORK AROUND THE WINDOW

Now continue to press the window tape onto the window frame. Fit each corner as described under 2).
(3) WORK AROUND THE WINDOW

(4) PULL OFF THE WIDE LINER AND SECURE

When the window tape has been attached all around the window frame and the gap sealed, pull off the wide backing paper and press on the tape. The higher the pressure, the better the adhesion (AIRSTOP ROLL Pressing Roller, AIRSTOP RAK Plastic Squeegee)!
(4) PULL OFF THE WIDE LINER AND SECURE