Article marked
Error occurred
Please try again later
OMEGA FROZEN Adhesive Paste
OMEGA FROZEN Adhesive Paste
OMEGA FROZEN Adhesive Paste is used to join seams of EPDM, AIRSTOP vapour retarders, OMEGA Roof Underlay and Facade Lining and ISOWINDOW Window Tapes. It bonds with most substrates customary in construction, such as wood, metal, stone, concrete, brick, plaster and bituminous surfaces.
The adhesive is permanently elastic, watertight and meets the requirements for air and wind tightness of a building envelope according to current standards such as DIN 4108-7.
Working temperature: from - 10 °C
The adhesive is permanently elastic, watertight and meets the requirements for air and wind tightness of a building envelope according to current standards such as DIN 4108-7.
Working temperature: from - 10 °C
- permanently elastic adhesive joint
- waterproof
- resistant to freezing
Available dimensions
| Article number | Packing unit | Colour | Content - ml | Carton content | Inquiry List |
|---|---|---|---|---|---|
| 3EPDMKL310 | Cartridge | black | 310 ml | 12 Stk |
|
Product data
Advantages
- very good adhesion to a number of substrates
- usable even at low temperatures
- resistant to freezing
- permanently elastic adhesive joint
- waterproof
- temperature-resistant from -40 °C to +80 °C
OMEGA FROZEN Adhesive Paste is used to join seams of EPDM, AIRSTOP vapour retarders, OMEGA Roof Underlay and Facade Lining and ISOWINDOW Window Tapes. It bonds with most substrates customary in construction, such as wood, metal, stone, concrete, brick, plaster and bituminous surfaces.
The adhesive is permanently elastic, watertight and meets the requirements for air and wind tightness of a building envelope according to current standards such as DIN 4108-7.
- Material composition
- Adhesive on polyurethane prepolymer basis with low solvent content
- Working temperature
- -10 °C
- Density - g/cm³
- 1.2 g/cm³
- Skinning time
- 5 min
- Storage
- 12 months unopened, at +5° - +30° C, protected from direct sunlight
Processing guideline
INFO
OMEGA FROZEN Adhesive Paste is applied using a manual injector to one side of the surface, which must be free from dust, grease, oil and loose parts. Soiled surfaces can be cleaned with spirit. Damp or wet surfaces must be dried before adhesion. We recommend an adhesion test before application.OMEGA FROZEN Adhesive Paste has the function of a seal, not of a permanent join. Vapour barriers and other membranes must always be secured using tacks, battens etc. (mechanically).
OMEGA FROZEN Adhesive Paste is not UV-resistant and must be protected from direct sunlight.
Attention: avoid contact with PS-foams such as EPS, XPS, etc.
Instructions
INFO
OMEGA FROZEN Adhesive Paste is applied using a manual injector to one side of the surface, which must be free from dust, grease, oil and loose parts. Soiled surfaces can be cleaned with spirit. Damp or wet surfaces must be dried before adhesion. We recommend an adhesion test before application.OMEGA FROZEN Adhesive Paste has the function of a seal, not of a permanent join. Vapour barriers and other membranes must always be secured using tacks, battens etc. (mechanically).
OMEGA FROZEN Adhesive Paste is not UV-resistant and must be protected from direct sunlight.
Attention: avoid contact with PS-foams such as EPS, XPS, etc.