Article marked

Error occurred Please try again later

ISOWINDOW FEBA SOFT ES

ISOWINDOW FEBA SOFT ES

The tape consists of a fleece structure that can be plastered over and is coated with a high-performance adhesive. The back is completely adhesive and has split liners. The tape is suitable for bonding to the window assembly.

Can be plastered and painted over.
Working temperature: from -5 °C

FINGERLIFT
EASY TO DETACH

Product data sheet

Available dimensions
Product data
Processing guideline
Downloads

ISOWINDOW FEBA SOFT ES

Available dimensions
Product data
Processing guideline
Downloads

Available dimensions

Article number	Type	Roll width	Roll length	Split liner	Carton		Inquiry List
3FEBA75E	ES	75 mm	25 m	15 / 60	6 rolls
3FEBA100E	ES	100 mm	25 m	15 / 85	4 rolls

Show Inquiry List

Product data

Field of application

for window installation inside

Advantages

„reversed-system“
„fingerlift“
soft flexible structure
extremely strong adhesion on all types of window
frame and various substrates e.g. concrete, plaster, OSB, wood, vapour barriers…
split liners
flexibility for movement of building component

The one-sided window tape consists of a fleece structure that can be plastered over and is coated with a high-performance adhesive. The back is completely adhesive and has split liners. The tape is suitable for bonding to the window assembly.

Material composition

Flexible fleece, laminated air-tight

sd-value

7 m

Temperature resistance

-40–80 °C

Working temperature

-5–40 °C

Shelf life

12 months

Colour

White with blue ISOWINDOW print

Processing guideline

INFO

ISOWINDOW FEBA SOFT ES is attached to the window frame after installation. The fleece side of the tape can be plastered over and painted over and must face outwards. The wide adhesive surface of the tape is attached to the wall, wood, OSB or vapour barrier.

(1)

Cut the window tape with approx. 12 cm extra length. Pull the masking paper off the adhesive strip and press the adhesive tape carefully onto the window frame.

(2)

Make a fold or loop at the corners. To do so, press the window tape firmly to the window frame as far as the corner, then lift slightly, push the material along and turn 90 °.

(3)

Now continue to press the window tape onto the window frame. The ‘corner’ fold seals the corners optimally. Do this at every corner.

(4)

When the window tape is attached to the entire window frame and the joint insulated, pull off the wide masking paper and press onto the window frame.
The more pressure applied, the better the adhesion (AIRSTOP ROLL Pressing Roller, AIRSTOP RAK Plastic Squeegee)!

Instructions

INFO

(1)

Cut the window tape with approx. 12 cm extra length. Pull the masking paper off the adhesive strip and press the adhesive tape carefully onto the window frame.

(2)

Make a fold or loop at the corners. To do so, press the window tape firmly to the window frame as far as the corner, then lift slightly, push the material along and turn 90 °.

(3)

Now continue to press the window tape onto the window frame. The ‘corner’ fold seals the corners optimally. Do this at every corner.

(4)

Downloads

Product data sheet Product data sheet pdf 794 KB

Downloads

Documents