Jump to the main navigation Jump to search Jump to breadcrumbs Jump to main content Jump to footer Jump to lang switch Jump to home page Jump to watch list
Article marked
Error occurred Please try again later

AIRSTOP VBB Fleece Bitumen Rubber Tape

AIRSTOP VBB Fleece Bitumen Rubber Tape
AIRSTOP VBB Bitumen Rubber Tape has excellent adhesive properties on a variety of substrates and is used especially to seal problematic joints between sills and concrete surfaces. It is also suitable for sealing butt joints, penetrations, valleys and flashing troughs in roof constructions, particularly with DHF (non-vapour retardant wood fibre board) panels and soft board panels.

Thickness: 1,5 mm Working temperature: from -5 °C
  • Protects sills in timber construction
  • In compliance with DIN 18533
  • Base sealing
  • Can be plasted over

Available dimensions

Article number Roll width Roll length Split liner Carton Inquiry List
3APVBB100 100 mm 10 m 50 / 50 12 rolls
3APVBB200 200 mm 10 m 100 / 100 6 rolls
3APVBB300 300 mm 10 m 150 / 150 1 rolls
3APVBB500 500 mm 10 m 300 / 200 1 rolls

Product data

Field of application

  • as sealant for DHF and soft board panels under the roof at butt joints, valleys and flashing troughs
  • as sealant at sills (floor and ceiling)
  • can be used as waterproofing for base (load – not heavy water) in accordance with ÖNORM B3692 and the guideline ‘Base connection in wooden construction’.
  • as base waterproofing in accordance with DIN18533
  • waterproofing membrane in accordance with DIN EN13969

Advantages

  • plastered
  • excellent adhesion
  • installation possible from -10°C
  • resistant to moisture
  • backing strips
To guarantee air and wind-tightness for the skin of a construction it must have the appropriate foils or panel materials providing a permanent seal at overlaps, joins, gaps, joints and at penetration points. AIRSTOP VBB Bitumen Rubber Tape has excellent adhesive properties on a variety of substrates and is used especially to seal problematic joints between sills and concrete surfaces. It is also suitable for sealing butt joints, penetrations, valleys and flashing troughs in roof constructions, particularly with DHF (non-vapour retardant wood fibre board) panels and soft board panels. Divided separating paper allows for perfect and precise installation.
Material composition
Bitumen rubber tape, adhesive on one side with fleece coating on upper side
Thickness
1.5 mm
Temperature resistance
-40–100 °C
Working temperature
in combination with UNI primer or BUBI LF adhesive primer -5–40 °C
Colour
Black
UV-resistance
4 months

Processing guideline

Instructions