Article marked
Error occurred
Please try again later
OMEGA FA GD2 Pipe Sleeve
OMEGA FA GD2 Pipe Sleeve
So that façade linings can effectively perform their task as wind-tight elements, they must also be sealed wind-tight in the areas of the pipe sleeves. OMEGA FA GD2 pipe sleeves, bonded wind-tight with ageing-resistant sealing plasters, guarantee that the construction is wind-tight. The black, UV-resistant surface of the OMEGA FA GD2 pipe sleeve corresponds to that of the OMEGA G50 and G20 façade linings.
Working temperature: from - 5 °C
Working temperature: from - 5 °C
Available dimensions
| Article number | Type | Outer dimension | for cable entry | for cable entry | Carton content | Inquiry List |
|---|---|---|---|---|---|---|
| 3OMRGD2F | FA GD2 | 150 mm | 15 mm | 20 mm | 30 Stk |
|
| 3OMAIRD1F | FA D1 | 150 mm | 8 mm | 12 mm | 30 Stk |
|
Product data
Field of application
- openings for conduits
Advantages
- extremely flexible
- resistant to ageing
- integrated sealing plaster for wind-tight adhesion
- rubber heat-resistant up to 160°C (short-term)
- resistant to UV
So that façade linings can effectively perform their task as wind-tight elements, they must also be sealed wind-tight in the areas of the pipe sleeves. OMEGA FA GD2 pipe sleeves, bonded wind-tight with ageing-resistant sealing plasters, guarantee that the construction is wind-tight. The black, UV-resistant surface of the OMEGA FA GD2 pipe sleeve corresponds to that of the OMEGA G50 and G20 façade linings.
- Material composition
- EPDM rubber, sealing plaster with age-resistant pure acrylate adhesive
- Temperature resistance
- -40–100 °C
- Working temperature
- -5–40 °C
- Colour
- Black
- Storage
- cool and dry
Processing guideline
Info
Pull the rubber sleeve over the pipe and stick to the substrate with the integrated sealing plaster. The diameter of the selected pipe sleeve must have the appropriate dimension for the pipe feed-through! Talcum or lubricant can be used if necessary to make it easier to feed the cables/pipes through the sleeve.The pipe must be led out of the underground at right angles and there must be no lateral pull on the sleeve.
The materials used must be free from dust and grease and substrates must be dry and supporting.
Turn the sealing plaster so that one tip is facing upwards to allow any water that runs off to the side to drain off easily.
The greater the pressure applied, the better the performance of the adhesive tape.
On highly porous and very absorbent substrates such as concrete, plaster, untreated steel or raw wood, we recommend pre-treatment of the substrate with our ISOCELL Primers.
Instructions
Info
Pull the rubber sleeve over the pipe and stick to the substrate with the integrated sealing plaster. The diameter of the selected pipe sleeve must have the appropriate dimension for the pipe feed-through! Talcum or lubricant can be used if necessary to make it easier to feed the cables/pipes through the sleeve.The pipe must be led out of the underground at right angles and there must be no lateral pull on the sleeve.
The materials used must be free from dust and grease and substrates must be dry and supporting.
Turn the sealing plaster so that one tip is facing upwards to allow any water that runs off to the side to drain off easily.
The greater the pressure applied, the better the performance of the adhesive tape.
On highly porous and very absorbent substrates such as concrete, plaster, untreated steel or raw wood, we recommend pre-treatment of the substrate with our ISOCELL Primers.
