ISOCELL Logo
Article marked
Error occurred Please try again later
Back to overview

OMEGA WD SK DUO Wind Seal

OMEGA WD SK DUO Wind Seal
Vapour-permeable, three-layer wind sealing membrane made of structured polypropylene, for installation directly onto the face of the thermal insulation or wood sheathing. Protects the wall makeup and the thermal insulation against moisture and wind.

Available dimensions

Article number Type Roll width Roll length Rolls / Pallet Total area Inquiry List
2WIND Standard 1.5 m 50 m 30 rolls 2250 m²
2WIND3M Standard 3 m 50 m 30 rolls 4500 m²
2WINDSK SK DUO 1.5 m 50 m 30 rolls 2250 m²

Field of application

  • for installation directly on thermal insulation or wood sheathing

Advantages

  • high vapour permeability
  • wind-tight
  • tear-resistant
  • soft
  • robust

Product data

Non-vapour retardant, 3-layer wind infiltration sheeting made from textured polypropylene with two twoway acrylate adhesive strips for installation directly on wood sheathing or thermal insulation. The sheeting protects the construction element and the thermal insulation against the effects of weather and penetration of air from outside.
Material composition
PP-fleece membrane
Thickness
0.59 mm
Colour
Black
Weight
100 g/m²
sd-value
0.02 m
Temperature resistance
-40 °C
Temperature resistance
80 °C
Temperature resistance
(short-term 100 °C)
UV-resistance
2 months
Resistance to water flow
W1
Resistance to water flow
EN 1928
Elongation - lengthwise
75 (-35 / +45)%
Elongation - crosswise
90 (±50) %
Elongation
EN 12311-1
Tensile strength - lengthwise
200 (±10) N / 50 mm
Tensile strength - crosswise
110 (-10 / +70) N / 50 mm
Tensile strength
EN 12311 - 1
Tear propagation resistance - lengthwise
80 (-5 / +40) N
Tear propagation resistance - crosswise
110 (-10 / +40) N
Tear propagation resistance
EN 12310-1
Storage
Cool and dry
Fire performance
E
Fire performance
EN 13501_1

Processing guideline

GUIDELINES FOR INSTALLATION OF OMEGA WD WIND SEAL

OMEGA WD Wind Seal is attached to the substrate using a staple gun with the printed side facing outwards. There should be approx. 10cm overlap.

AIRSTOP SPRINT Sealant or OMEGA QUILLI Sealing Compound should be used for the bonding of OMEGA WD Wind Seal panels or at joins. The materials used must be free from dust and grease and the substrates must be dry and supporting. The adhesive has the function of sealant and not of a strong connector.
GUIDELINES FOR INSTALLATION OF OMEGA WD WIND SEAL