Article marked
Error occurred
Please try again later
OMEGA SD10 Vapour Retarder
OMEGA SD10 Vapour Retarder
Weather resistant 3-layer roof sheeting with vapour delaying effect for all insulation on battens. Installation under the insulation layer.
- for over-rafter insulation
- solid
- non-slip
Available dimensions
| Article number | Type | Roll width | Roll length | Rolls / Pallet | Total area | Inquiry List |
|---|---|---|---|---|---|---|
| 2OMDB | Standard | 1.5 m | 50 m | 20 rolls | 1500 m² |
|
| 2OMDBSK | SK DUO | 1.5 m | 50 m | 20 rolls | 1500 m² |
|
| 2OMDB3SK | SK DUO | 3 m | 50 m | 20 rolls | 3000 m² |
|
Product data
Field of application
- for over-rafter insulation
- on the room side below the thermal insulation
Advantages
- lightweight
- tear-resistant
- rigid
- 100% recyclable
- resistant to ageing
- max. 2 months exposure to the elements
Weather-resistant 3-layer roof sheeting with vapour delaying effect for all insulation on battens. 2 twoway acrylate adhesive strips are integrated for adhesion at joints.
Type: Standard = without adhesive tape, SK DUO = double sided adhesive tape.
- Material composition
- 3 - layer PP fleece with two two-way acrylate adhesive strips
- sd-value
- 10 (-5 / +8) m
- Elongation (EN 12311-1) lengthwise
- 40 – 100 %
- Elongation (EN 12311-1) crosswise
- 50 – 110 %
- Tensile strength (EN 12311-1) lengthwise
- 300 (±40) N/50 mm
- Tensile strength (EN 12311-1) crosswise
- 230 (±30) N/50 mm
Processing guideline
Application
Installation: position on the sheathing with the printed side facing upwards (UV-resistant side). Attach to the wooden subframe using a staple gun.Overlaps and edge joints: min. 10 cm overlap – this is marked on the OMEGA SD10 SK DUO Vapour Barrier with green dotted lines. Overlaps and joints should be sealed airtight with AIRSTOP SPRINT Sealant or with OMEGA QUILLI Sealing Compound.
Instructions
Application
Installation: position on the sheathing with the printed side facing upwards (UV-resistant side). Attach to the wooden subframe using a staple gun.Overlaps and edge joints: min. 10 cm overlap – this is marked on the OMEGA SD10 SK DUO Vapour Barrier with green dotted lines. Overlaps and joints should be sealed airtight with AIRSTOP SPRINT Sealant or with OMEGA QUILLI Sealing Compound.
