ISOCELL Logo
Article marked
Error occurred Please try again later
Back to overview

vibrafoam Vibration Isolation

vibrafoam Vibration Isolation
PURASYS vibrafoam provides effective protection against vibrations and shock. These high-tech PUR elastomers can be used as full surface, point or strip bearings between the structural components matching the relative component geometry or as tailor-made moulded parts. We can offer you 13 standard materials as well as the possibility of producing special types in many colours and thicknesses.
  • RELIABLE VIBRATION PROTECTION FOR A BUILDING
  • IMPROVEMENT OF MARKET VALUE
  • ENHANCED LIFE AND WORKPLACE QUALITY

Available dimensions

Article number Type Static load N/mm² Width Length Thickness Colour Inquiry List
5VFSD10125 SD 10 0.01 1000 mm 2000 mm 12.5 mm red
5VFSD16125 SD 16 0.016 1000 mm 2000 mm 12.5 mm pink
5VFSD26125 SD 26 0.026 1000 mm 2000 mm 12.5 mm orange
5VFSD40125 SD 40 0.04 1000 mm 2000 mm 12.5 mm yellow
5VFSD65125 SD 65 0.065 1000 mm 2000 mm 12.5 mm bright green
5VFSD110125 SD 110 0.11 1000 mm 2000 mm 12.5 mm green
5VFSD170125 SD 170 0.17 1000 mm 2000 mm 12.5 mm dark green
5VFSD260125 SD 260 0.26 1000 mm 2000 mm 12.5 mm petrol
5VFSD400125 SD 400 0.4 1000 mm 2000 mm 12.5 mm blue
5VFSD650125 SD 650 0.65 1000 mm 2000 mm 12.5 mm dark blue
5VFSD950125 SD 950 0.95 1000 mm 2000 mm 12.5 mm dark purple
5VFSD1300125 SD 1300 1.3 1000 mm 2000 mm 12.5 mm purple
5VFSD1900125 SD 1900 1.9 1000 mm 2000 mm 12.5 mm bordeaux red
Show Inquiry List

Product data

Field of application

  • Decoupling of wall-ceiling joints through elastic layers that dampen vibrations

Advantages

  • improved soundproofing in timber construction
  • very good damping properties
  • maximum performance through optimisation of load stress
  • low natural frequency in a wide load range
  • defined compression
PURASYS vibrafoam provides effective protection against vibrations and shock. These high-tech PUR elastomers can be used as full surface, point or strip bearings between the structural components matching the relative component geometry or as tailor-made moulded parts. We can offer you 13 standard materials as well as the possibility of producing special types in many colours and thicknesses.
Temperature resistance
-30–70 °C

Processing guideline

Instructions

Recommended products

Show all