Article marked
Error occurred
Please try again later
OMEGA UDOs 330 UV Eaves Protection Strip
OMEGA UDOs 330 UV Eaves Protection Strip
Long-term solution for protection of OMEGA UDOs 330 Roof Underlay from UV rays in the eaves area.
Connection of OMEGA UDOs 330 Roof Underlay (330 g/m²; UV-resistance 5 months) with UV-resistant PVC (650 g/m²; UV-resistance >10 years).
Connection of OMEGA UDOs 330 Roof Underlay (330 g/m²; UV-resistance 5 months) with UV-resistant PVC (650 g/m²; UV-resistance >10 years).
Available dimensions
| Article number | Type | Roll width | Roll length | Colour | Rolls / Pallet | Inquiry List |
|---|---|---|---|---|---|---|
| 2OMSTUV | Standard | 0.65 m | 30 m | Grey/grey | 30 rolls |
|
Product data
Field of application
- for ventilated pitched roofs
- min. roof pitch 1,5°
- for direct installation on wooden sheathing
Advantages
- increased protection from UV rays at the eaves
Long-term solution for protection of OMEGA UDOs 330 Roof Underlay from UV rays in the eaves area.
Connection of OMEGA UDOs 330 Roof Underlay (330 g/m²; UV-resistance 5 months) with UV-resistant PVC (650 g/m²; UV-resistance >10 years).
- Material composition
- PVC sheeting
- Weight
- 650 g/m²
- Colour
- Light grey
- UV-resistance
- > 10 Jahre
Processing guideline
Info
OMEGA UDOs 330 UV Eaves Sheeting is installed as the first layer in the eaves region. The PVC sheeting must have a watertight joint with the flashing. For further handling the instructions for OMEGA UDOs 330 Roof Underlay apply as well as the seal of approval guidelines for roof underlayment. (”Gütesiegel für Unterdachbahnen”)There are the following possibilities for bonding at the eaves:
(1)
When eaves flashing with a PVC coating is used, OMEGA UDOs 330 UV Eaves Sheeting can be welded uniformly with the flashing using heat.
(2)
The eaves flashing must be freed from grease. (If necessary, the flashing can be cleaned with OMEGA QSM Welding Compound and a cloth). Apply OMEGA N55 Adhesive to the flashing, which has previously been sanded with a coarse grain and place the OMEGA UDOs 330 UV Eaves Sheeting in the OMEGA N55 while it is still damp, and press down.
(3)
Clean the joint of the lowest layer of OMEGA UDOs 330 UV Eaves Sheeting and the flashing with a cloth that has been slightly moistened with OMEGA QSM Welding Compound and bond with the flashing using two butyl adhesive strips.
Instructions
Info
OMEGA UDOs 330 UV Eaves Sheeting is installed as the first layer in the eaves region. The PVC sheeting must have a watertight joint with the flashing. For further handling the instructions for OMEGA UDOs 330 Roof Underlay apply as well as the seal of approval guidelines for roof underlayment. (”Gütesiegel für Unterdachbahnen”)There are the following possibilities for bonding at the eaves:
(1)
When eaves flashing with a PVC coating is used, OMEGA UDOs 330 UV Eaves Sheeting can be welded uniformly with the flashing using heat.
(2)
The eaves flashing must be freed from grease. (If necessary, the flashing can be cleaned with OMEGA QSM Welding Compound and a cloth). Apply OMEGA N55 Adhesive to the flashing, which has previously been sanded with a coarse grain and place the OMEGA UDOs 330 UV Eaves Sheeting in the OMEGA N55 while it is still damp, and press down.
(3)
Clean the joint of the lowest layer of OMEGA UDOs 330 UV Eaves Sheeting and the flashing with a cloth that has been slightly moistened with OMEGA QSM Welding Compound and bond with the flashing using two butyl adhesive strips.
